Gallery Tip # 2007 002.. From the Sewing and Knitting Gallery

A Good Running Sewing Machine

After 8 years of being an Authorized Repair Shop for Brother, I have concluded that as much as 80% of my repairs are thread-related problems which could have been avoided. Here are some simple tips to keep your machine clear of thread. 1. Always use a brand-name thread for sewing. For machine embroidery always use a brand-name, machine-embroidery thread; this includes the bobbin thread. 2. Always use the correct bobbin for your machine. (See your manual or your dealer if you are unsure what size to use.) 3. Many new Brother Innov-is Machines are packed with two bobbin cases. One bobbin case for use with genuine Brother bobbin thread and the other for use with all other brands of bobbin thread or pre-wound bobbins such as Nebs, Coats & Clark, or Robison-Anton, to name a few. (If your Brother machine takes the new fatter bobbins also use the bobbin center pin spacer with the narrow pre-wounds, refer to manual.) 4. Keep the bobbin area free of loose threads and fuzzies. A vacuum cleaner works best. Use the soft upholstery brush attachment and be sure not to scrape the metal parts with the metal hose from the vacuum which can cause burrs on the bobbin plate or bobbin case which can cause thread fraying and breakage. “Canned air” may be used but be careful not to force the dirt deeper into the machine. 5. Replace the bobbin case as needed with genuine parts for your machine. Genuine bobbin cases are set to factory tension specifications for your machine. 6. I have seen machines with large amounts of thread wrapped around the hand-wheel. Keep loose thread away from the hand-wheel it turns while the machine is running. (Note: only turn the hand-wheel the same direction the machine turns it, generally counter clockwise.) 7. Do not spray water or cleaner on your LCD display. Use a soft cloth with an appropriate cleaner and gently wipe it down. 8. Keep your machine covered when it is not in use. A clean sewing machine is a good running sewing machine.We hope you found this article helpful,for more information or to purchase items discussed please visitSewing machines knitting machines

1,380 Responses to “Gallery Tip # 2007 002.. From the Sewing and Knitting Gallery”

  1. dave says:

    .

    ñïàñèáî çà èíôó….

  2. Leo says:

    .

    áëàãîäàðþ!!…

  3. Joey says:

    .

    thanks!!…

  4. Stephen says:

    .

    áëàãîäàðñòâóþ!!…

  5. Enrique says:

    .

    thanks for information….

  6. Jason says:

    .

    ñïàñèáî çà èíôó!…

  7. Dean says:

    .

    áëàãîäàðñòâóþ!!…

  8. Harold says:

    .

    ñýíêñ çà èíôó….

  9. juan says:

    .

    thanks for information….

  10. manuel says:

    .

    ñïñ!!…

  11. randy says:

    .

    good info….

  12. freddie says:

    .

    ñïàñèáî….

  13. bradley says:

    .

    thanks for information!…

  14. richard says:

    .

    tnx for info!…

  15. Harold says:

    .

    ñïàñèáî çà èíôó!!…

  16. Homer says:

    .

    ñýíêñ çà èíôó….

  17. Rex says:

    .

    good info!!…

  18. Patrick says:

    .

    tnx for info….

  19. cory says:

    .

    ñïàñèáî….

  20. clarence says:

    .

    ñýíêñ çà èíôó!!…

  21. Darrell says:

    .

    ñïñ çà èíôó!…

  22. Jose says:

    .

    ñïàñèáî çà èíôó!!…

  23. harold says:

    .

    thank you!!…

  24. ian says:

    .

    ñïñ çà èíôó!!…

  25. Ben says:

    .

    ñýíêñ çà èíôó….

  26. Jorge says:

    .

    ñïñ!!…

  27. ricardo says:

    .

    ñýíêñ çà èíôó….

  28. Roger says:

    .

    áëàãîäàðåí!…

  29. Mario says:

    .

    ñýíêñ çà èíôó!…

  30. Kenneth says:

    .

    tnx for info….

  31. ricky says:

    .

    ñïñ çà èíôó!!…

  32. dwight says:

    .

    good info….

  33. edward says:

    .

    thanks for information….

  34. doug says:

    .

    ñïàñèáî….

  35. Herman says:

    .

    áëàãîäàðþ!!…

  36. Jonathan says:

    .

    ñïàñèáî!!…

  37. Shannon says:

    .

    thank you!!…

  38. darryl says:

    .

    thank you!…

  39. mario says:

    .

    tnx for info!!…

  40. vincent says:

    .

    tnx for info!!…

Leave a Reply


web counter